Description

The oven body consists of sandwich panels that are inserted into each other. The insulation of the oven body is made of stone wool, 150 mm thick. The panels are inserted into each other and glued with heat-resistant sealant.

The heating temperature is from 120°C to 150°C, and the holding time of the product in the middle of drying is from 5 to 15 minutes.

The inner lining of the oven and all air ducts are made of galvanized metal.

An exhaust fan installed at the top of the oven is used for operating in forced and automatic modes for removing the vapors – generated during the drying of products.

Heat exchanger:

The heat exchanger is capable of raising the temperature in the drying oven from 0 to 150 ºC.

The combustion chamber is made of stainless steel.

The thermal insulation of the thermoblock consists of 150 mm thick basalt wool.

The drying oven is designed for the final drying of metal products after surface preparation, before painting.

Oven temperature control and exhaust fan control:

• the temperature is controlled by a digital temperature sensor, where the necessary parameters are set (temperature, holding time and delta temperatures);
• the operation of the exhaust fans is automatically controlled and monitored.

Air curtains:

The inlet and outlet of the oven are equipped with air curtains to avoid the loss of hot air from the oven. Each of them blows the required air using 2.2 kW fans and prevents the loss of hot air from the oven. All air ducts inside the oven are made of 1mm galvanized metal.