Project №187

Project №187 for the client:

• Painting camera
• Polymerization oven
• Cardan type conveyor
• Power cabinet with control panel

Painting camera

Materials:

• The camera cabin is AISI 304 stainless steel with a thickness of 1.5 mm.
• Cyclone, filter block, recovery system – St3 with powder coating.
• Manipulator robot – 2 pcs.
• Cyclone – 1 pc.
• Block for 9 filters (Ø 320×600 mm) – 1 pc.
• Solenoid valve – 9 pcs.
• Exhaust fan – 15 kW.
• Lighting: (40W) – 6 pcs.

Polymerization oven

Type of heating: electric with forced convection of hot air.
Power of the TENs cassette: 2×120 kW.
Convection fan: 4×4 kW.
Air curtains: 2×2.2 kW.
Exhaust fan: 0.55 kW.
Temperature control: 4 points.

The furnace consists of assembled sandwich panels (material – galvanized steel 0.7 mm), thermal insulation – basalt wool 150 mm thick.

Cardan type conveyor

Conveyor length: up to 125 m/p.
Adjustable speed: from 0.6 to 1.5 m/min.
Drive mechanism with a gearbox: 1.1 kW.
Interval between suspensions: 400 mm.
Load capacity: 50 kg on 1 point, suspension on 2 points = 80 kg/suspension.
Automatic lubrication station in 4 points.

Power cabinet with control panel

The line is equipped with one control panel, from which the system is started and controlled for all work processes.

Additional conveyor emergency stop buttons – at the painter’s workplace and in the area of hanging and removing products.