Conveyor-type transport systems are used to move products along the technological cycle in production.
They provide high productivity and processes automation. They also exclude the hard physical labor of personnel while moving products around the shop. It Is a prerequisite for the organization of any modern workshop, for example:
powder
painting
mining
industry
woodworking
enterprises
engineering
metallurgy and
energetics
instrumentation
glass
industry
food
industry
construction
textile
industry
production
automatization
The transportation system might be executed both on the floor and by air. Determination of the version depends on the connection to the production area and the characteristics of your products.
The most convenient and frequently used design of transport lines is the air-rail. This design of the transport line provides cyclical and continuous operation of the section with high productivity.
Each conveyor is made individually for your business. At the planning stage, technologists calculate and select the length, carrying capacity and speed of the conveyor for your production has strict technological processes adherence: painting, drying, cooling, etc.
Products must be hung on conveyors suspension hooks for supporting the appropriate weight and providing high-quality grounding of products.
example of a transport system
The conveyor consists of chains, pins, cross-shaped, where bearings are mounted, plates and pusher brackets, therefore it has the ability to move along three axes.
The conveyor model TsK-075 provides the ability to hang loads up to 75 kg.
The conveyor chain is completely made of heat-resistant steel and heat treated. Chain wear and stretch are minimized. The conveyor has a chain tensioning mechanism.
The conveyor model TsK-150 provides the ability to hang loads up to 150 kg due to the tire dividing the load into 2 hanging points.
Standard straight rails are produced in lengths of 2 meters but production lengths might vary. The gap of the standard flange is 500 mm. It provides a virtually seamless route for a load-hung conveyor. The rail components are made of plain carbon steel and powder coated.
Horizontal / vertical rotation – an element that allows to change the direction of the chain horizontally / vertically. It is produced for corners with different values and a radius of 1m. Has the same profile as the straight rail.
Mounting bracket – a connector assembly for easy installation. Easily mounted with studs, can be adjusted up-down, left-right, if necessary, very easy to dismantle. Using this component ensures a neat installation of the system.
The tensioning system is used to adjust the tension along the entire length of the cardan chain and to keep it running parallel to the tires. It will stretch over time.
According to the length and type of conveyor, carriage-screw tensioning mechanisms are used; as well as tensioning stations of two structures, working in dependence on each other. It moves by means of four rollers located in the corners of the tension station structure.
Sight glass rails used for chain installation and maintenance. Has the same profile as the straight rail. It is mounted on a straight rail section.
The chain bearings are open for easy lubrication. They need to be lubricated periodically. The conveyor is equipped with a special automatic lubrication system, a lubricator.
Sight glass rails used for chain installation and maintenance. Has the same profile as the straight rail. It is mounted on a straight rail section.
It is recommended to install an automatic conveyor for large production workshops to save time, money and minimize the human factor.
This type of transport system continuously transports cargo (products) from one production process to another in a vicious circle of the route.
The speed is set in the range of 0.5 – 8 meters per minute with a load on 1 hanging point from 5 kg to 75 kg.
All this makes such a transport system convenient for use in any production.
We produce various conveyors and accessories for them.
