Project No. 161

Tunnel polymerization oven

The frame part is made of sheet metal 1.2-1.5 mm thick, the inner lining is made of galvanized steel, the outer elements are powder coated.

Oven type – tunnel on thermoblock

Heating type 1 – Shadows (ribbed) of 2.0 kW, mounted in a separate thermoblock with convection.

Regulation temperature – support – 20-250°С / resolution 1°С.

Installed power, thermoblock ~ 200 kW.

Internal dimensions, (L x W x H) – 6000 x 2500 x 3000 m.

External dimensions, thermoblock (L x W x H) – 6500 x 3850 x 3265 m.

Supply voltage – 380 V.

The set includes:

Polymerization oven
Thermoblock
Automatic control panel
Convection fan
Exhaust fan
Ventilation ducts (boxes) in the oven

Spraying chamber KN – 2

Body parts are made of sheet metal 1.2 – 1.5 mm, powder coated.

Camera type – two-post.

Fan capacity – 7500 m3 / h.

The degree of air purification (which is returned to the shop) from powder is not less than 99.8%.

Supply voltage – 380 V.

Installed power – 5.5 kW.

Air duct diameter – 300/400 mm.

Fans Е C 360 Smart line – 1 pc.

The set Included:

Spray chamber body
LED flashlight (12W)
Control panel
Fan
Electric motor
filter 32 * 90

Filter column R-6

Filter pipe (fabric)

Transport system

I-beam No. 12.

Tribox spray (tribostatics)

Compressed air pressure: 0.1-0.25 MPa

Weight: no more than 0.6 kg

Nominal productivity: 1-2.5 m² / min

Air loss, no more: 3 m³ / h

Air dryer + silica gel

The compressed air preparation unit 35955662.BP.007-00 is designed to dry compressed air that comes from the compressed air line or directly from the compressor before being used in equipment for applying powder polymer coatings.

The unit can be used in other cases that need to remove moisture from the air.

Technical specifications:

Inlet air pressure: 02-06 (2-6) MPa, Kgf / cm²
Air productivity normalized: 30 m³ / h
Working temperature: 15 … 35 ° С
Dehumidification rate, dew point: -15 ° С
Dimensions (length x width x height): 665х250х1240 mm
Weight: 40 kg

Installing Electron

A06 ECM03N-E-COAT

Powder coating machine with tank

The installation is designed for the application of powder paints by electrostatic spraying in industrial conditions on metal products. This unit is convenient to operate and control the supply of paint and air. Manual charge control ensures high-quality coating of various shapes.