Project №196

Project №196 for the client:

  • The PPL polymerization furnace is dead-end
  • Spray chamber KN-2
  • Transport systems
  • Column filter R-6

The polymerization furnace is dead-end or continuous (quartz lamp heating element) with convection

There are guides under the top, they are not included.
The frame part is made of sheet metal with a thickness of 1.2-1.5 mm, the inner lining is made of galvanized steel, the external elements are covered with powder paint.
The type of heating is an incandescent quartz infrared radiation lamp 230 V-1.0 kW. Which ensures, in case of failure of one or more lamps, to complete the mode of baking products. Control of lamp serviceability is checked visually when the door is opened.
Block of lamps (6-8 lamps).
Automatic control panel – 1 pc.

The control panel provides the possibility to set the following parameters:
– heating temperature from 20-250 C;
– baking time from 0-30 minutes;
– temperature drop delta from 0-10°C.

Oven temperature control – 1 pc. (thermotransducer TSP1-3-Pt100).
Convection fan – provided;
An exhaust fan is provided.

Spraying chamber of two KN-2 posts

Body parts are made of sheet metal 1.2 – 1.5 mm, covered with powder paint, tray on corner panel made of stainless steel AISI 430 1.2 mm.

The camera kit includes:

  • Filter 32×90 – 6 pcs.
  • Solenoid valve – 6 pcs.
  • LED flashlight (12W) – 4 pcs.
  • Fan with a 4.0 kW engine – 2 pcs.
  • Control panel – 2 pcs.

Transport systems

The supporting structure is made of a profile pipe 80x80x3 and a channel 12U (P12).
Guides from I-beam No. 10.
Suspended systems from a profile pipe 60x30x3 and strip 50×5.
The loader is not rotatable on 1 guide.
Permissible load on the guide: up to 300 kg.
Permissible load on the loader: up to 300 kg.

Column filter R-6

Metal construction.
Fabric filters/pipes.

poroshkovaya-kraska-oborudovanie-photo-00004-ava

© 2022 by Smart Line - All rights reserved
design by
X