Project №210

Project №210 for the client:

• PPL polymerization furnace 10*2.3*2.0
• KN-2 paint application camera
• Column filter R-6
• Transport systems

PPL polymerization furnace 3

The frame part is made of sheet metal with a thickness of 1.2-1.5 mm, the inner lining is made of galvanized steel, the external elements are covered with powder paint.

The type of heating is an electric heater (ribbed, 1.4 kW). Shades are mounted in separate thermoblocks with ventilation, from which the heat is then spread throughout the entire volume of the furnace with the help of vents. channels The convection system is made with a set of cassettes for better air convection.

The total power is 63 kW.
Automatic control panel – 1 pc.

The control panel provides the possibility to set the following parameters:

– heating temperature from 20-250°C;
– baking time from 0-30 minutes;
– temperature drop delta from 0-10°C.

Oven temperature control – 1 pc. (thermotransducer TSP1-3-Pt100).
Convection fan – provided.
An exhaust fan is provided.

Two-post spraying chamber (КН-2)

The body parts are made of sheet metal 1.2 – 1.5 mm, covered with powder paint, the tray for the corner panel is made of stainless steel AISI 430 1.2 mm.

The camera kit includes:

• Filter 32×60 – 6 pcs.
• Solenoid valve – 6 pcs.
• LED flashlight (12W) – 4 pcs.
• Fan with a 4.0 kW motor – 2 pcs.
• Control panel – 2 pcs.

Column filter R-6

Metal construction.
Fabric filters/tubes.

Transport systems

The supporting structure is made of a 100x100x3 profile pipe, a 12U channel (P12) and a I-beam No. 10.
Guides – from a bent profile 60x40x3.
Suspended systems – from a profile pipe 60x40x3 and a strip 40×5.
The permissible load on the guide is up to 300 kg.