Project №204 for the client:
- Polymerization oven
- Spray chamber KN-2
- Transport systems
-
-
poroshkovaya-kraska-oborudovanie-photo-00002
-
-
poroshkovaya-kraska-oborudovanie-photo-00005
-
-
poroshkovaya-kraska-oborudovanie-photo-00010
-
-
poroshkovaya-kraska-oborudovanie-photo-00012
-
-
poroshkovaya-kraska-oborudovanie-photo-00014
-
-
poroshkovaya-kraska-oborudovanie-photo-00015
-
-
poroshkovaya-kraska-oborudovanie-photo-00013
-
-
poroshkovaya-kraska-oborudovanie-photo-00016
-
-
poroshkovaya-kraska-oborudovanie-photo-00017
-
-
poroshkovaya-kraska-oborudovanie-photo-00018
-
-
poroshkovaya-kraska-oborudovanie-photo-00006
-
-
poroshkovaya-kraska-oborudovanie-photo-00007
-
-
poroshkovaya-kraska-oborudovanie-photo-00008
-
-
poroshkovaya-kraska-oborudovanie-photo-00020
-
-
poroshkovaya-kraska-oborudovanie-photo-00021
Through-flow polymerization furnace (boiling element, thermoblock) with convection
The frame part is made of sheet metal 1.2-1.5 mm, the inner lining is made of galvanized steel, the external elements are covered with powder paint.
The type of heating is TEN (ribbed) of 2.0 kW, mounted in a separate thermoblock with convection. From the thermoblock, heat is distributed throughout the entire volume of the furnace with the help of ventilation channels.
Delivery completeness:
- Polymerization furnace – 1 pc.
- Thermoblock – 1 pc.
- Passport – 1 pc.
- Automatic control panel – 1 pc.
- TSP1-3-Pt100 – 1 pc.
- Convection fan – 1 pc.
- Exhaust fan – 1 pc.
Power – 120 kW, cable cross-section – copper from – 75 squares (depending on the distance to which the cable will need to be pulled, specify in more detail).
KN-2 two-post spraying chamber
Body parts are made of sheet metal 1.2 – 1.5 mm, covered with powder paint.
The camera kit includes:
- Cyclone – 1 pc.
- Block of filters, for 9 filters – 1 pc.
- LED flashlight (12W) – 4 pcs.
- Fan with a 15.0 kW motor – 1 pc.
- Control panel – 1 pc.
- Power – 16 kW.
- Cable section – copper 6/10 squares.
- Air consumption from 340 liters per minute.
Transport systems
The supporting structure is a manufactured beam – I-beam No. 10.
Guides – I-beam No. 10.
Suspension systems – made of sheet metal with a thickness of 6 mm and rollers – 6 pieces.
Allowable load on the guide up to 300 kg.