Conveyor line with product surface preparation area

CERTIFICATES

Description

The automatic line includes:

  • spraying chamber;
  • polymerization oven;
  • drying oven;
  • conveyor of the transport system.
  • surface preparation line;
  • recuperation system.

Oven body

As in the drying oven – the oven body consists of sandwich panels that are inserted into each other. The insulation of the oven body is made of stone wool, 150 mm thick. The panels are inserted into each other and glued with heat-resistant silicone. The inner sheathing of the oven and all air ducts are made of galvanized metal, the outer sheathing of the oven is made of a sheet of ferrous metal coated with powder paint. There is an expansion at the back of the polymerization oven for painting large-sized items .

Thermoblock

The thermoblock is regulating the temperature up to 250 ºC. The combustion chamber is made of stainless steel, the chimneys are made of a boiler pipe or electric heating elements. Thermal insulation of the thermoblock consists of a heat-resistant material 150 mm thick. Convection fans are located inside the thermoblock.

Oven temperature control and exhaust fan control

The temperature is controlled by a digital temperature sensor, where the necessary parameters are set (Temperature, holding time and delta temperatures). The burner works automatically according to the set temperature. Also, the operating mode of the exhaust fans is controlled automatically.

Chimney temperature control

Temperature in chimneys at the polymerization oven is measured automatically. In case of allowed tena norm increases the line automatically turns off and the emergency stop system activates.

Air curtains

The inlet and outlet of the oven  are equipped with air curtains to avoid the loss of hot air. Each of them blows the required air using 2.2 kW fans and prevents the loss of hot air from the oven. All air ducts inside the oven are made of 1mm galvanized metal.

Additional information

Dimensions, mm

individual, we produce according to client’s requirements

Material

metal / plastic / galvanized

Openings sizes, mm

1500х400

Heating power

from 74 kW or 90,000 kcal / hour

Total power of electricity, kW:

15

Total air consumption, l / min

1000

Required line connections

• electricity 220-380 V / 50 Hz / gas (diesel burner);
• air purified from moisture and oil with the required pressure;
• water or demi water.

Reviews

There are no reviews yet.

Be the first to review “ Conveyor line with product surface preparation area ”

Your email address will not be published.


© 2022 by Smart Line - All rights reserved
design by
X