Handguns differ in the following criteria.<\/span><\/p>\n Charge method:<\/strong><\/p>\n Powder mixture feeding method:<\/strong><\/p>\n Though guns differ from each other they have typical problems for users. And today we will analyze the problems, causes and methods of elimination.<\/span><\/p><\/p>\n\n\n\n <\/p>\n <\/p>\n Problems<\/b><\/p>\n<\/td>\n Possible reason<\/b><\/p>\n<\/td>\n Elimination method<\/b><\/p>\n<\/td>\n<\/tr>\n Weak flame \/ no flame with normal air supply<\/span><\/p>\n<\/td>\n Clogged channels of the ejector and air path<\/span><\/p>\n<\/td>\n Disconnect the high-voltage converter, disconnect the connector, remove the hopper, unscrew the ejector, purge the channel with air. Sift and dry powder paint.<\/span><\/p>\n<\/td>\n<\/tr>\n The sprayed powder does not precipitate<\/span><\/p>\n<\/td>\n Air pressure is higher than acceptable<\/span><\/p>\n<\/td>\n Adjust the airflow using the regulator on the sprayer body<\/span><\/p>\n<\/td>\n<\/tr>\n There is no reliable contact with the “ground” of the sprayed part<\/span><\/p>\n<\/td>\n Clean the suspension, if it is impossible to replace<\/span><\/p>\n<\/td>\n<\/tr>\n Working with “antiques”, “metallic” the barrel is clogged with metal particles of powder<\/span><\/p>\n<\/td>\n Clean the barrel by blowing compressed air and a cleaning rod<\/span><\/p>\n<\/td>\n<\/tr>\n The lamp on the gun barrel is off<\/span><\/p>\n<\/td>\n The power supply is out of order<\/span><\/p>\n<\/td>\n Replace or repair the power supply<\/span><\/p>\n<\/td>\n<\/tr>\n The reed switch is out of order<\/span><\/p>\n<\/td>\n Replace the reed switch<\/span><\/p>\n<\/td>\n<\/tr>\n The trigger plate with a magnet is deformed<\/span><\/p>\n<\/td>\n Bend the spring until the malfunction is eliminated or replace the trigger<\/span><\/p>\n<\/td>\n<\/tr>\n The barrel is out of order<\/span><\/p>\n<\/td>\n Replace barrel<\/span><\/p>\n<\/td>\n<\/tr>\n The trigger “sticks” (if the trigger is not pressed, the lamp on the gun barrel is on)<\/span><\/p>\n<\/td>\n The reed switch is out of order<\/span><\/p>\n<\/td>\n Replace the reed switch<\/span><\/p>\n<\/td>\n<\/tr>\n The trigger spring with a magnet is deformed<\/span><\/p>\n<\/td>\n Bend the spring until the malfunction is eliminated<\/span><\/p>\n<\/td>\n<\/tr>\n The bubbling does not work<\/span><\/p>\n<\/td>\n Clogged air supply channel for bubbling<\/span><\/p>\n<\/td>\n Remove the hopper from the handle, unscrew the bubbling adjustment knob, clean the hole with a thin wire<\/span><\/p>\n<\/td>\n<\/tr>\n Shocks<\/span><\/p>\n<\/td>\n No contact of the operator’s hand with the metal grounding bracket on the handle \/ Malfunctioning trigger or reed switch<\/span><\/p>\n<\/td>\n Make contact: press your finger to the clip, clean the clip if it gets dirty, make a hole in the glove Check the trigger and reed switch operation: when the trigger is released, the barrel charge indicator should go out. If it does not go out, check the operation of the reed switch (open the plate with the magnet and the reed switch, the light should go out). In case of malfunction, replace the reed switch. If the reed switch is working properly, adjust the trigger (clean, bend the trigger plate with the magnet until the malfunction is eliminated).<\/span><\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n <\/p>\n <\/p>","protected":false},"excerpt":{"rendered":" If you have a powder coating workshop or you are thinking about it, you’d better figure out everything about the…<\/p>\n","protected":false},"author":1,"featured_media":10367,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[1],"tags":[],"_links":{"self":[{"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/posts\/10259"}],"collection":[{"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/comments?post=10259"}],"version-history":[{"count":4,"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/posts\/10259\/revisions"}],"predecessor-version":[{"id":17499,"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/posts\/10259\/revisions\/17499"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/media\/10367"}],"wp:attachment":[{"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/media?parent=10259"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/categories?post=10259"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/smartline.in.ua\/en\/wp-json\/wp\/v2\/tags?post=10259"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}\n
\n
![\"\u043f\u0438\u0441\u0442\u043e\u043b\u0435\u0442\u044b-\u0440\u0430\u0441\u043f\u044b\u043b\u0438\u0442\u0435\u043b\u0438](\"http:\/\/test.smartline.in.ua\/wp-content\/uploads\/2019\/07\/IMG_3299-1500x630-1024x430.jpg\")
<\/figure>\n\n\n\n\n
\n \n \n \n \n \n \n \n \n \n \n \n \n <\/td>\n \n \n \n <\/td>\n \n \n \n \n \n \n \n <\/td>\n \n \n \n <\/td>\n \n \n \n <\/td>\n \n \n \n \n \n \n \n <\/td>\n \n \n \n \n \n \n \n \n \n \n